Análise de pesquisas sobre intermodulação entre antenas de leitores RFID aplicados a sistemas de produção

Flávio Lucas da Rosa, Carlos Fernando Jung, José Luis Duarte Ribeiro

Resumo


Este artigo apresenta uma revisão sistemática. Com o objetivo de evidenciar e analisar as contribuições realizadas por pesquisas focadas nos efeitos da interferência causada pela intermodulação. Ou seja, entre antenas acopladas a leitores RFID (Radio-Frequency Identification). Para isso, foram selecionadas 37 publicações das plataformas: IEEE Periodicals, Emerald Management e-Journals, SciVerse ScienceDirect (Elsevier), e SciVerse Scopus (Elsevier). Verificou-se que existe uma concentração de 70% das publicações em cinco países e que estas publicações são recentes, 49% nos últimos três anos. Além disso, identificou-se que 27% das pesquisas selecionadas utilizam algum sistema de controle de potência sobre as antenas baseado em leitores RFID. No entanto, foi encontrada apenas uma pesquisa que recomenda que se desenvolvam antenas. As quais permitem o controle da distribuição da potência sobre uma área específica. Como resultado principal, apresenta-se um diagrama que reúne e organiza hierarquicamente os tipos de algoritmos anticolisão relatados nas pesquisas selecionadas.


Palavras-chave


RFID; Interferência; Antena; Leitor

Texto completo:

PDF/A

Referências


ALSALIH, W.; ALI, K.; HASSANEIN, H. A power control technique for anti-collision schemes in RFID systems. Computer Networks, v. 57, n. 9, p. 1991-2003, 2013.

AZAMBUJA, M.C.; JUNG, C.F.; CATEN,C.S.T.; HESSEL, F.P. RFID-Env: Methods and software, simulation for RFID environments. Business Process Management Journal, v. 16 n. 6, p.1014-1038, 2010.

CARBUNAR, B.C.; RAMANATHAN, K.; KYUTÜRK, M.; JAGANNATHAN, S.; GRAMA, A. Efficient tag detection in RFID systems. Journal of Parallel and Distributed Computing, v. 9, n. 2, p. 180-196, 2009.

CHA, K.; ZAWODNIOK, M.; RAMACHNDRAN, A.; SARANGAPANI, J. Interference mitigation and read rate improvement in rfid-based network-centric environments. Sensor Review, v. 26 n. 4, p. 318-325, 2006.

CHANG, Y.S.; SOM, M.G.; OH, C.H. Desing and Implementation of RFID based air-cargo monitoring system. Advanced Engineering Informatics, v. 25, n. 1, p. 41-52, 2011.

CHEN, C. Design of a child localization systemon rfid and wireless sensor networks. Journal of Sensors, p. 1-8, 2010.

CHEN, H.; ZHU, Y.; HU, K. Multi-colony bacteria foraging optimization with cell-to-cell communication for RFID network planning. Applied Soft Computing, v. 10, n. 2, p. 539-547, 2010.

CHENG, J.; CHO, S.H. A robust baseband demodulator for ISO 18000-6C RFID reader systems. International Journal of Distributed Sensor Networks, p. 1-12, 2012.

CHENN, H.; ZHU, Y.; HU, K.; KU, T. RFID network planning using a multi-swarm optimizer. Journal of Network and Computer Applications, v. 34, n. 3, p. 888-901, 2011.

CHEUNG, H.H.; CHOI, S.H. Implementation issues in RFID-Based anti-counterfeiting systems. Computers in Industry, v. 62, n. 7, p. 708-718, 2011.

CHIN, K.W.; KLAIR, D. E2MAC: an energy efficient MAC for RFID-Enhanced wireless sensor networks. Pervasive and Mobile Computing, v. 7, n. 2, p. 241-255, 2011.

CHOI, J.S.; LEE, R.; ENGELS, D.W.; ELMASRI, R. Passive UHF RFID-Based localization using detection of tag interference on smart shelf. IEEE Transactions on Systems, Man, and Cybernetics — Part C: Applications and Reviews, v. 42, n. 2, p. 268-275, 2012.

COSTIN, A.; PARADHANANGA, N.; TEIZER, J. Leveraging passive RFID technology for construction resource feld mobility and status monitoring in a high-rise renovation project. Automation in Construction, v. 24, p. 1-15, 2012.

DELGADO, M.V.B.; FERRERO, R.; GANDINO, F.; MARIANO, P.P.; REBAUDENGO, M. A geometric distribution reader anti-collision protocol for rfid dense reader environments. IEEE Transactions on Automation Science and Engineering, v. 10, n. 2, p. 296-306, 2013.

DOMDOUZIS, K.; KUMAR, B.; ANUMBA, C. Rádio-Frequency Identification (RFID) applications: a brief introduction. Advanced Engineering Informatics, v. 21, n. 4, p. 350-355, 2006.

DONG, Q.; SHUKLA, A.; SHRIVASTAVA, V.; AGRAWAL, D.; BANERJEE, S. Load balancing in large-scale RFID systems. Computer Networks, v. 52, n. 9, p. 1782-1796, 2008.

HIGGINS, J.P.T.; GREEN, S. Cochrane, cochrane handbook for systematic reviews of interventions. Version 5.10. 2011. Disponível em: . Acesso em: Março 2013.

HSU, C.C.; YUAN, P.C. The design and implementation of an intelligent deployment system for RFID readers. Expert Systems with Applications, v. 38, n. 8, p. 10506-10517, 2011.

HUANGA, H.P.; CHANG, Y.T. Optimal layout and deployment for RFID systems. Advanced Engineering Informatics, v. 25, n. 1, p. 4-10, 2011.

JIMENEZ, C.; PÉRÈS, S.D.; FEUILLEBOIS, C.; PAULY, E. Optimizing the positioning and technological choices of RFID elements for aircraft part Identification. European Journal of Operational Research, v. 227, n. 2, p. 350-357, 2013.

JUELS, A. RFID security and privacy: a research survey. IEEE Journal on Selected Areas in Communications, v. 24, n. 2, p. 1-19, 2006.

JUNG, C.F. Análise de artigos de revisão e elaboração de artigos científicos. Edição 2013. Disponível em: . Acesso em: 1 out. 2013.

KO, D.; KIM, B.; AN, S. Research on anti-reader collision protocols for integrated RFID-WSNs. KSII Transactions on Internet and Information Systems, v. 4, n. 5, p. 776-798, 2010.

LAZARO, A.; GIRBAU, D.; VILLARINO, R. Effects of Interferences in UHF RFID systems. Progress In Electromagnetics Research, PIER 98, p. 425-443, Spain, 2009.

LEE, E. K.; OH, S.Y.; GERLA, M. RFID assisted vehicle positioning in VANETs. Pervasive and Mobile Computing, v. 8, n. 2, p. 167-179, 2012.

LI, E.; CHUNHUI, H. Optimal scheduling-based RFID reader-to-reader collision avoidance method, using artificial immune system. Applied Soft Computing, v. 13, n. 5, p. 2557-2568 , 2013.

LIM, M.K.; BAHR, W.; LEUNG, S.C.H. RFID in the warehouse: a literature analysis (1995-2010) of its applications, benefits, challenger and future trends. International Journal Production Economics, v. 145, n. 1, p. 409-430 , 2013.

MAINA, J.Y.; MICKLE, M.H.; LOVELL, M.R.; SCHAEFER, L.A. Application of CDMA for anti-collision and increased read efficiency of multiple RFID tags. Journal of Manufacturing Systems, v. 26, p. 37-43, 2007.

MEHRJERDI, Y.Z. RFID-enabled healthcare systems: risk-benefit analysis. International Journal of Pharmaceutical and Healthcare Marketing, v. 4, n. 3, p.282-300, 2010.

MEHRJERDI, Y.Z. RFID: The big player in the libraries of the future. The Electronic Library, v. 29, n. 1, p. 36-51, 2011.

MOTAMEDI, A.; SOLTANI, M.; HAMMAD, M. Localization of RFID-equipped assets during the operation phase of facilities. Advanced Engineering Informatics, v. 27, n. 4, p. 566-579, 2013.

NAMBOODIRI, V.; PENDSE, R. Bit level synchronized mac protocol for multi-reader RFID networks. EURASIP Journal on Wireless Communications and Networking, 2010.

OZTEKIN, A.; PAJOUH, F.M.; DELEN, D.; SWIM, L.K. An RFID network design methodology for asset ttracking in healthcare. Decision Support Systems, v. 49, n. 1, p. 100-109, 2010.

PAPAPOSTOLOU, A.; CHAOUCHI, H. RFID-assisted indoor localization and the impact of interference on its performance. Journal of Network and Computer Applications, v. 34, n. 3, p. 902-913, 2011.

PARK, K.; SO, K. C.; NAM, E.; KYUNGDOO, T. Perceptions of RFID technology: a cross-national study. Industrial Management & Data Systems, v. 110, n. 5, p. 682-700, 2010.

PARLAK, S.; SARCEVIC, A.; MARSIC, I.; BURD, R.S. Introducing RFID technology in dynamic and time-critical medical settings requirements and challenges. Journal of Biomedical Informatics, v. 45, n. 5, p. 958-74, 2012.

PENTTILÄ, K. Rádio Frequency Technology for automated manufacturing and logistics control. Part 2: RFID antenna utilisation in industrial applications. The International Journal of Advanced Manufacturing Technology, v. 31, n. 1, p. 116-124, 2006.

RAZAVI, S. N.; MONTASER, A.; MOSELHI, O. RFID deployment protocols for indoor construction. Construction Innovation, v. 12, n. 2, p. 239-258, 2012.

REN, Z.; ANUMBA, C.J.; TAH, J. RFID-facilitated construction materials management (RFID-CMM): a case study of water-supply project. Advanced Engineering Informatics, v. 25, n. 2, p. 198-207, 2011.

ROUSSOS, G.; KOSTAKOS, V. RFID in pervasive computing: state-of-the-art and outlook. Pervasive and Mobile Computing, v. 5, n. 1, p. 110-131, 2009.

SAYEED, S.I.; KIM, S.Y.; YANG, H.; YOOK, J.G. A Solution to the RFID reader interference problem using adaptive beam-forming approach. IETE Technical Review, v. 28, n.1, p. 17-28, 2011.

SAYGIN, C.; NATARAJAN, B. RFID-based baggage-handling system design. Sensor Review, v. 30, n. 4, p. 324-335, 2010.

SHIH, D.H.; SUN, P.L.; YEN, D.C.; HUANHG, S.M. Taxonomy and survey of RFID anti-collision protocols. Computer Communications, v. 29, n. 11, p. 2150-2166, 2006.

TRAPPEY. C.V.; WU, H.; DUTTA, Y.; TAGHABONI, F. Using patent data for technology forecasting: China RFID patent analysis. Advanced Engineering Informatics, v. 25, n. 1, p. 53-64, 2011.

WANG, C.; DANESHMAND, M.; SOHRABY, K. Optimization of tag reading performance in generation-2 RFID protocol. Computer Communications, v. 32, n. 11, p. 1346-1352, 2009.

WANG, D.; IP, W.H. Review on modeling and optimization problems about RFID technology and applications. In: 25th CHINESE CONTROL AND DECISION CONFERENCE, p. 1258-1263, 2013.

WANG, L.C. Enhancing construction quality inspection and management using RFID technology. Automation in Construction, v. 17, n. 4, p. 467-479, 2008.

WU, N.C.; NYSTROM, M.A.; LIN, T.R.; YU, H.C. Challenges to global RFID adoption. Technovation, v. 26, n. 12, p. 1317-1323, 2006.

YANG, L.; HAN, J.; QI. Y.; WANG, C.; GU, T.; LIU, Y. Season: shelving interference and joint identification in large-scale RFID systems. In: Proceedings IEEE, 3092-3100, 10-15 April, 2011.

ZHENG, J.L.; QIN, T.F.; NI, G.N. Tree-based backoff protocol for fast RFID tag identification. The Journal of China Universities of Posts and Telecommunications, v. 20, n. 2, p. 37-41, 2013.

ZHU, L.; YUM, T.; SHING, P. A critical survey and analysis of RFID anti-collision mechanisms. IEEE Communications Magazine, 214-221, 2011.




e-ISSN 2175-8018


Creative Commons License
IJIE - Iberoamerican Journal of Industrial Engineering foi licenciada sob uma Licença Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


Iberoamerican Journal of Industrial Engineering. Universidade Federal de Santa Catarina. Departamento de Engenharia de Produção e Sistemas. Florianópolis, SC, Brasil.

Para entrar em contato com a equipe editorial do IJIE, encaminhe um e-mail para periodico.ijie@gmail.com ou ijie@contato.ufsc.br